CMH Fibreglassing provides a wide range of pond based services. Following is a brief description of each area we work in. If you have a fibreglassing job that doesn't fall into one of these categories please contacts us as we are happy to help in other areas.
CUSTOM PONDS
We specialise in custom designed ponds, troughs and tanks of any shape and size. This allows landscapers more flexibility in designing gardens and allows for water to be included in small or oddly shaped places.
MOULDED PONDS
We have over 60 different moulded pond styles for you to choose from in either a black, brown or sand finish. The full range is available for viewing and ordering on our pond page.
ONSITE PONDS
The pond needs to be either boxed up with wood or cement sheet and braced, boxed up with bricks or concreted. All conduits cables and overflow pipes should be in place and extruding a minimum of 3 inches. Existing ponds need to emptied and allowed to dry for 24 hours depending on weather. We smooth the sides and floor, clean the pond and lay the fibreglass. After a couple of hours we apply a topcoat that is available in a variety of colors. Depending on the weather 2x1x.5 can be completed in a day.
WATERPROOFING
When waterproofing the builder needs to have the floors and walls as clean as possible and all piping and drainage extruding a minimum of 3 inches. The area to be waterproofed needs to be clearly marked and dry. We will prepare surface, apply fibreglass and finished with a rough surface as to ensure adhesion of tiles. An average bathroom takes approximately 4 hours.
